 |
Portable/Table-top OnLine process Bubble Tensiometer | ||
 |
The SITA pro line F10 is the world's first mobile tensiometer for measuring the dynamic surface tension of liquids in a running process. The insturment works by measuring bubble pressure. This is done by pumping air through a capillary into the liquid to be analysed. The pressure within the bubble is proportional to the surface tension. Click on the image for more details. | ||
 |
The user friendly Hand-Held Tensiometer | ||
 |
The SITA Dynotester is small, light and with stayingpower and a battery to last at least 10 operating hours. You can measure surface tension on site, at the plant, at your customer's premises or at the laboratory. you can store up to 25 different data records in the instrument or output the data on your laptop.Click on the image for more details. | ||
 |
The Online portable R&D Tensiometer | ||
 |
The SITA science line T60 is the world's first hand-held laboratory instrument to measure the dynamic surface tension from the highly dynamic to the semi-static range. Its special feature-Auto Mode, allow you you to quickly analyse the dynamic behavior of surfactants. In OnlineoMode, continuous measurements can be carried out with a pre-selected bubble life-time. Click on the image for more details. | ||
 |
On line Tensiometer with CMC | ||
 |
The T60 CMC set up is a PC controlled liquid dispensing system (Auto-titrator),for auto CMC (Critical micellar formation concentration) measurement This system comprises a bottle-mounted dispensing unit for precise dispensing, pipetting, diluting, sampling and time controlled operations. Click on the image for more details. | ||
 |
Low cost semi-automatic tensiometer Ring-plate tensiometer | ||
 |
The TD1 is easy to operate and provides a direct feel for surface and interfacial tension. It's particularly suitable for beginners and for education. Surface and interfacial tension values are displayed digitally. The selection of measuring methods is simlpe and calibration is implemented using standard weights. | ||
 |
Automatic Tensiometer | ||
 |
The successor to the TD 2 accomplishes the move to fully automated tensiometry and maximises user convenience directly over a PC. This extremely compact stand-alone device offers everything needed to measure surface and interfacial tension at the push of a button either in the laboratory |
||
 |
Drop Volume | ||
 |
The
TVT2 is engineered to measure the surface and interfacial tension of liquids.
Its strengths lie in the high precision determination of dynamic interfacial
tension. it uses the characteristic that the volume of a drop released
from a needle in air is depenent on its surface tension or on its interfacial
tension between the two phases if released into a second immiscible phase
(oil). This measuring principle has been realized in a measuring device
that is easy to use thanks to precision engineering and modern electronics.
. |
||
 |
Drop Volume TensiometerFully Automatic Ring/Plate Tensiometer (with numerous options) | ||
 |
The robust and reliable TE 3 is offers the usual surface/interfacial tension measurement technology based on the Du Nouy ring and Wilhelmy plate, plus additional options for measuring criticial micelle concentrations and contact angles on solid and powdered samples and therefore also the surface energy.// | ||
 |
TensiometerBubble Pressure Tensiometer | ||
|
The fast adsorption processes of surfactants used in many applications are frequently not measurable with normal tensiometers. Only the bubble pressure tensiometer enables the generation of fresh surfaces and the measurement of the dynamic surface tensions at very short age of those surfaces. The uniqe bubble pressure method used in the MPT2 enables the optimal recording of dynamic characteristic curves of surfactant solutions down into the sub millisecond range. | ||
 |
Dynamic Contact Angle measuring device and tensiometer | ||
 |
The DCAT-11comes with an advance software allows you to perform measurement of: Critical Micelle concentrations(CMCs), liquid densities, wetted length, Surface Energy on compact solids, fibers, and powders.Click on the image for more details. |
||
 |
Upgrade version of Dcat-11, for powders, surfactants and fiber bundles | ||
 |
The DCAT-21 differs from the DCAT11 in a higher travel resolution for the sample table, a higher travel speed, the automatic software-controlled coupling lock for the balance, and the greater maximum sample size for soilids in sheet or rod form. Click on the imagefor more details. | ||
|
|||
